Discussions

Wavlink AC1200 Repeater Setup will boost your existing network very easily. If you are encountering trouble with your current networking system such as slow network or no network in a particular area of your home then setting up this device is the best solution for you. Adding this device to your networking system is not so hard. You just need to access the web interface of the device and make changes in the network. Also you have to add this device to your networking system by connecting it with your router device. If you desire to do the configuration of this device and add it to your current networking system whether it is your home or office network you can do it by following the below specified steps. Further we are going to break down the process into easily understandable steps so that even a new person to networking can do it.

Wavlink AC1200 Repeater Installation

Installation of the device hardware is the first step which you have to follow before performing the [Wavlink AC1200 Repeater Setup](https://wifiwavlink.net/wavlink-ac1200-setup/). If your Repeater device installation is done accurately then you are able to configure it very easily without any issue. Here are the steps which you have to follow to install your device.
Begin the process with the search of the location to put your repeater device. During the initial stage of the setup process you have to keep the repeater device very close to the router device. If you proxy both the devices then it is the best option.

After the placement you have to power up your repeater device. To turn it on, use the power source and the power adapter. Connect the pin of the adapter into the repeater device and plug of the adapter to the power source. As you turn it on it will take a few minutes to boot up properly.

Wavlink AC1200 Repeater Configuration

You can initiate the Wavlink AC1200 Repeater Setup process once your device boots up. The steps you have to follow to complete the configuration are as under:

Connect

Begin with the connection of a client device to your repeater network. Make sure the client device you are using has a web browser. For the connection you need to use wired method or wireless method. In the wireless method you need to access the standard wireless network name and password. On the other hand you can use a wired method in which an ethernet cable is required to connect the devices.

Access

Now you have to launch a web browser on your device to get access to the dashboard. In the URL bar specify the web address or IP address to reach out to the setup page. As the setup page appears, specify the standard login details. After that you have to submit the login information and you will get access to the dashboard.

Configure

Once you get the access to the dashboard you have to choose the language and then choose the network of your router device with which you are going to connect your repeater device. As you choose the network the site will prompt you to enter the password. After that you have to secure your account by changing the admin credentials. Next you have to replace the existing Wi-Fi network name of the repeater and its password to something unique. Make other changes in the network as per your requirement. Update the device firmware and submit the changes done by you.

Test

Once your device reboot itself you have to test the network. For network testing you can use a smartphone device. Connect the device with the newly created Network and browse the Internet on the device. You have to move around your space where you are facing trouble and then check whether the signals are available or not.

Conclusion

Wavlink AC1200 Repeater Setup is not such a hard task. Hope the process is useful for you. After setting up the device you have to relocate your repeater device to boost its performance. While relocating make sure you are repeater should be within the range of the router device but closer to the area where you are facing signal problems.